Amber Roofs - flat roofing specialists in Jersey
AMBER ROOFS
Jersey · Channel Islands

Roofing Systems

The right system for the right roof.

Every system below has a place - and a set of limits. We specify for the roof, the substrate and the exposure, then explain why.

Request a Roof Assessment
S/01

Liquid-applied waterproofing

A cold-applied resin, usually fleece-reinforced, that cures into one continuous waterproof layer following the exact shape of the roof.

Typical roof types: Small to mid-sized flat roofs, balconies, dormers and detail areas.

Request a roof assessment
Best applications
  • Detail-heavy roofs
  • Balconies and walkways
  • Refurbishment over sound substrates
  • Upstands and outlets
Main strengths
  • Fully seamless - no laps or welds
  • Bonds to the substrate
  • Excellent around complex geometry
  • No hot works on most systems
Important limitations
  • Substrate must be sound, clean and dry
  • Weather- and temperature-dependent
  • Coverage and thickness need careful control
S/02

Single-ply membranes

Factory-made sheet membranes hot-air welded or bonded into a continuous covering, usually over insulation laid to falls.

Typical roof types: Extensions, apartment blocks, commercial roofs, terrace decks.

Request a roof assessment
Best applications
  • Large uninterrupted roof areas
  • New builds and extensions
  • Commercial and multi-unit roofs
Main strengths
  • Fast to install over big areas
  • Consistent factory-made thickness
  • Welded seams are testable on site
  • Wide range of build-ups
Important limitations
  • Detailed roofs need more hand-forming
  • Edge fixings must suit local wind exposure
  • Seam quality depends on workmanship
S/03

Reinforced bituminous membranes

Multi-layer bituminous sheets, torch- or self-adhesive-applied, building up a robust covering in two or more plies.

Typical roof types: Larger flat roofs, podium decks, commercial and mixed-use buildings.

Request a roof assessment
Best applications
  • Roofs needing extra robustness
  • Podiums and trafficked areas
  • Refurbishment of built-up roofs
Main strengths
  • Redundancy from multiple layers
  • Long-established technology
  • Good puncture resistance
Important limitations
  • Heavier build-up than single-ply
  • Some systems involve hot works
  • More layers means longer installation
S/04

EPDM roofing

A synthetic rubber membrane, often laid as a single sheet across the whole roof field with bonded or mechanically fixed perimeters.

Typical roof types: Small to medium domestic flat roofs with simple shapes.

Request a roof assessment
Best applications
  • Simple rectangular roofs
  • Garages, outbuildings, garden rooms
  • Straightforward extensions
Main strengths
  • Few or no field seams
  • Flexible across temperature swings
  • Low maintenance in service
Important limitations
  • Detailing relies on bonded accessories
  • Less suited to heavily penetrated roofs
  • Vulnerable to sharp mechanical damage
S/05

Zinc and architectural metal roofing

Standing-seam and panelised metal roofing, where the roof is an architectural element as much as a weathering layer.

Typical roof types: Architectural residential projects, dormers and canopies.

Request a roof assessment
Best applications
  • Feature roofs
  • Premium new builds
  • Pitched-to-flat transitions
Main strengths
  • Distinctive architectural finish
  • Very durable when correctly detailed
  • Works on pitched and low-pitch designs
Important limitations
  • Higher cost and longer lead times
  • Demands precise substrate and ventilation detailing
  • Coastal exposure narrows material choice

Service life and guarantees vary by system and site conditions - we confirm both in writing for your project rather than quoting a blanket figure.

Roofing Systems & Manufacturers

Proven systems. Installed for Jersey.

We work with established manufacturers and specialist suppliers to select the right waterproofing system for each roof, substrate and level of exposure.

CARLISLE
Liquid waterproofing systems

CARLISLE CM Europe

High-performance CARLISLE systems, including ARBOFLEX® PU, for seamless waterproofing around complex details, upstands and penetrations.

Official website
SILTEC
Flat roofing and waterproofing systems

Siltec

Specialist flat roofing, liquid waterproofing, single-ply and insulation systems, backed by project-specific technical specification.

Official website
DANOSA
Complete waterproofing systems

DANOSA

Complete flat roofing solutions - single-ply, reinforced bituminous and liquid-applied - for new-build and refurbishment projects.

Official website

The final system is chosen for the roof condition, substrate, drainage and exposure to Jersey's coastal weather.

Discuss the Right Roofing System

Not sure which is right?

We'll assess your roof and recommend the correct system - free survey, no obligation.

Request Free Survey
Call WhatsApp Free Quote